Dold Italia S.r.l.

Via Privata Passo Pordoi, 5
20139 Milano
Italia
UG 9256/804

Smart motorstarter with autom. phase sequence correction

UG 9256/804

Contacts

Nominal voltage

Ramp time

Nominal current

Approvals and Markings

Variant

  • 0066450
  • UG9256.11/804/61 3AC200-480V 9A
The smart motorstarter UG 9256/804 and UG 9256/807 is used to provide always a clockwise phase... altro

Descrizione del prodotto

The smart motorstarter UG 9256/804 and UG 9256/807 is used to provide always a clockwise phase sequence and to start asynchronous motors. Independent of the the pase sequence on the input it will always provide clockwise sequence on the output to the motor. The unit also protects the motor against phase failure and motor overload. The relays of the reversing circuit switch without current. This provides a long electrical life. To reduce the motor starting current and protect the drive, the motor starter is eqquipped with a fixed soft start function.

Specifiche tecniche

Width: 22,5 mm
1- / 3-phase: 3
Auxiliary voltage: DC 24 V
Load voltage up to: 3AC 200 - 480 V
Load current up to: 9 A
On/Off Input Control: DC
Signalling output: Yes
Temperature monitoring: Yes
Type: UG 9256/804

Vorteile / Kundennutzen

  • Up to 4 functions in one unit
    - Providing clockwise phase sequence at the motor connection terminals
    - Phase failure detection
    - Motorprotection Class 10 A, Class 5
    - Softstart
  • Galvanic mains separation by forcibly guided contacts contact opening min. 0.5 mm (UG 9256/807)
  • 66 % less space
  • Simple and time-saving commissioning as well as user-friendly operation through setting via potentiometer on absolute scale
  • Hybrid relay combines benefits of relay technology with non-wearing semiconductor technology
  • High availablility by
    - Temperature monitoring of semiconductors
    - High withstand voltage up to 1500 V
    - Load free relay reversing function

Merkmale

  • According to UL 60947-4-2, IEC/EN 60947-4-2
  • To reverse the rotary field
  • For 3-phase motors with rated motor current from Ie 0.1 A ... 0.5 A or 0.5 ... 2 A or 1.5 A ... 9 A
  • 1 potentiometer für setting of rated motor current
  • 3 LEDs for status indication
  • Reversing with relays without current, switching with thyristor
  • Galvanic separated 24V-inputs for clockwise
  • Reset button on front
  • Connection facility for external reset button
  • Relay indicator output for operation
  • Galvanic separation between control circuit and power circuit
  • Galvanic separation of motor terminals from mains voltage in off state or fault condition (UG 9256/807)
  • Width 22.5 mm